Xr bms swap
-
I did a Jw chip install on a XR 4210 controller, Pint bms and Jw battery. I bought a 4210 controller because it was about $200us dollars cheaper than a <4210 controller. The Jw chips were $50us on sale, but now there is a open source "Owie" project which is a Jw chip clone using a $3 esp8266 chip, I have some on order.
The Jw battery, Pint bms in this build were salvaged/repaired units.
-
@lemur I didn't realise a Pint BMS could work with an XR controller.
I assumed there would be something in the signalling to say "I'm a Pint/XR" to force it to not work between models but happy to see that's not the case :)
-
@lia I'm going for a ride with this combination today and hopefully it will be ok. May have to hail a taxi. Haha.
... Meanwhile, I'm waiting anxiously for an email for shipping on the GT as it's supposed to be shipped today. -
Owie isn't a clone of the JW FFM chip. It is already better, and will only get even more better. Current enhancements include having access to individual cell voltages, a better %remaining calculation, wireless firmware upgrades, and board locking. Soon coulomb counting.
-
@biell That's great, I'm just waiting for the eps8266 chips. Seems like Owie enhancements are coming fast and furious. T
-
@biell said :
... and board locking.
This is smth that really should have done by FM at first place, for crying out loud.
-
@biell said in Xr bms swap:
Soon coulomb counting.
-
@lia said in Xr bms swap:
@lemur I didn't realise a Pint BMS could work with an XR controller.
This is great news, opens up so much more stock for repairs. Thanks for testing this @Lemur
-
Pint bms works in the 4209 xr??
are the plugs the same? this makes bringing frankenboard to life a little easier!!
anybody got a spare xr battery box ? -
@lia Finally got a chance to test the Pint bms , Jw chip , 4210 controller combination . You are right about pairing , that combo doesn't work.
- The Pint bms and JW chip does NOT work with 4210> controller, keeps on asking for reboot, would work for a few minutes then code 16 comes on. The Jw chip does pair a 4208 bms with the 4210 controller and that's the combo I riding with now *. I put that retraction on our local FB page.
I have to try a Pint bms and 4210 controller with Owie.
- The Pint bms and JW chip does NOT work with 4210> controller, keeps on asking for reboot, would work for a few minutes then code 16 comes on. The Jw chip does pair a 4208 bms with the 4210 controller and that's the combo I riding with now *. I put that retraction on our local FB page.
-
@stinkyface Sorry, to burst that bubble, actual test ride resulted in code 16 and rebooting.
-
@lemur said in Xr bms swap:
@stinkyface Sorry, to burst that bubble, actual test ride resulted in code 16 and rebooting.
All good here. Worth a shot.