In the wild... Probably not. Urban jungle, maybe 😉

I've even been chased by foxes here before. Luckily I can go faster than them !

Just love a late night float.

Finally !!!

It's taken me a long time to get these all done. The hardest one was the lunch time rides. That's probably taken 4 years lol.
The ascent and descent ones were also tricky but I completed them in September 2023...
The easiest were the night owl...

Here's one, not too hard but poor quality makes it a bit trickier. Though there's not too many places it could be 🤣

Late last year I had a job to do in a place called Weston Super Mare, as usual I took my board to be able to add another location on the map... Oh and to keep up the day streak of course. 😉
While I was out floating on the promenade I happened across Dave and his onewheel, a local who was regularly floating around here...
This photo opportunity came up and I couldn't believe my luck with the wording in the background...
It was great meeting a fellow onewheeler and enjoying a bit of carving along the prom... Cheers Dave. 👍

Just a few snaps from a recent trip to the Netherlands... Always great fun ;)

The Sussex Downs with a view to the coast.
Edit. With a Onewheel hiding somewhere….

My board’s history…

New board, just out of the box 😀

Temporary vinyl wrap for protection (carbon fibre look)

In the Netherlands, with homemade rail guards

Trail riding locally, Brighton way in the distance… Stroh green setup… with a Hoosier treaded tyre, oh and flight fins… had them a while though.

Latest setup with Craft&Ride grip tape.

To be continued………….. 🤞

Managed to catch this fox on camera today, I have had one chasing me up the road before, this one was a bit unsure but waited long enough for me to get the phone from my pocket :)

As promised.
Screenshot of my day streak and mileage…

@lia
Lovely. Thanks. 👍
I have found some other ones too. Once I tackle it I'll confirm what works best.
Fingers crossed 😉

Hi all,

Started taking the V1 apart.
2 different bearings, held in by circlips too.
6906 and 6203

Shouldn't be a problem to get them but...

My problem is the connector won't fit through the bearing. ?

Has anyone got any experience of this and can those connectors be taken apart ?

@hanahsdax
Nice one, thanks.
As you know, it takes some dedication to get them done.
I'm sure you've enjoyed doing it as much as I have 😉👍😉👍

@sirgu

Well, 99.9% on the same XR.
A few rides on the Pint and a couple on the V1, but seeing as the day streak relies on the XR, that's my go to ride.
Over that time, 3 falls.
One at 2mph. Loose gravel.
Another at 21mph on the road going up and over a railway bridge.
The last one recently on the V1, I didn't allow for it's lack of torque. Probably went down at about 12mph. This may be its limit. Lol.

Most of the rides have been completed on tarmac across the south of the UK with some in mainland Europe when on holiday.
The ascent/descent in one ride was done in northern Spain, the hills were good there and I had some spare time. Really enjoyed that.
Tough ones for me were the lunchtime rides, then early morning. Easiest being the night owl ones.
From memory, the longer day rides and weekly rides were pretty tough too.
I've been out in all weathers, beautiful sunshine, torrential rain, high wind, snow and ice.

There were no achievements when I got the XR in early 2019 and even when they first introduced them I didn't really make an effort until the day before Xmas 2020 (I think)
The battery is now dead at 25% so range is limited especially in winter.

😆

@notsure
Lol... A new battery would be nice 😉

Finally !!!

It's taken me a long time to get these all done. The hardest one was the lunch time rides. That's probably taken 4 years lol.
The ascent and descent ones were also tricky but I completed them in September 2023...
The easiest were the night owl...

@lia
Lovely thx...
I have a bearing press tool for the XR (not tried yet lol) that may work.
Seeing the V1 doesn't need to be ridden daily at the moment there's no rush to get them and replace in one day, so I can get the measurements. I'll update this thread when I do...

Many thanks and Merry Christmas to you and the whole community 🎄

Hi there,

Having recently taken ownership of a V1.
I am looking to replace it's bearings.
The boards mileage showed 1 mile when I got it which I know is not correct. Not sure how that happens mind you...

Anyway from a little research there is not a great deal of info available.

So can someone tell me if 61907-2RZ is the correct bearing for starters and does anyone have any pointers on changing them please ? Else it'll have to be threatened with a big hammer lol.

I can get access to a machine shop if necessary.

I will be changing bearings in my XR soon too but that seems well documented and straightforward enough.

Many thanks in advance for any advice here.

@s-leon
Thank you kind sir...
My new ride is certainly different.
I think owv1 needs new bearings from what I can tell, something I will post separately about on this forum later on today. Otherwise, I'm loving it so far ;)

Keep on floating for sure...
Just 8 more lunch time rides until I have completed all the achievements...
The lunch time rides have been the hardest with work 'n all that.

I've also just purchased an OG onewheel from eBay. Collecting tomorrow... Let's hope that's ok ..

Maybe get a day streak on that board.

Hoping 2025 better than 2024 😉