Environments
-
A thick, dense build-up pad of wet autumn leaves dragging! This leaf-clog happened twice in three miles of trail.
-
@s-leon Oh no D:
I had this happen with wet freshly cut grass. It's amazing how this can send you almost instantly.Guess that explains where all the leaves went in this pic though ;)
https://owforum.co.uk/post/3130 -
@lia -- A clog of wet grass dumped you? Oh my! Careful, please! You are important!
The stuffed autumn leaf-pack just slowed me down, until I stopped and unclogged it -- twice. Early on when clogs of clumps of grass with dirt, and another time, snow pack (which froze the tire solidly in place), both made me walk, I decided that bolt-on fenders were not for me! Ratchet straps are much more readily removable. For the leaf-clog I did not even need to remove the funky fender; I just grabbed and pulled out handfuls of leaves, then rolled the tire -- over and over.
-
In a follow up to my WWLD post above, here's the Hawaii Pint X edition:
For the record, no I didn't! :D I don't care what @lia would do!
GT-S > GT > Pint X > XR > +
-
@s-leon Hold up, what kind of OW mod is that? That's actually pretty cool!
113 volts?! I could lick that!
-
@loaffette haha which one @S-Leon's? I think it has something to do with moving the weight of the battery so that there is more torque before push back? Either that or I am just making stuff up and they just wanted a different battery there.
-
Hi @cheppy44 -- Here's the story of how the EGO battery came to be mounted above my sensor foot: When I started riding with 6.5 shock absorbers I needed a fender/battery platform with height to go over them. Looking around my junk I found a thin stainless steel cooking pot that fit nearly perfectly -- except it was too high to reasonably mount a heavy battery atop. And, at the time, for range, I wanted to mount two EGO batteries. On the sides of the stock pot the handles made nice little shelves to keep the batteries from sliding down when I hugged them to the pot with a ratchet strap. But batteries mounted to the sides seemed like it would be tippy, and in front-to-back the rear battery made for uncomfortable awkwardness, so then I really just used only the one in front. I was a little skeptical about its placement, but I was more focused on the shock absorber ride. Lo and behold! -- I liked the weight and feel of eight extra pounds above my sensor foot (with NO stock battery weight under the trailing foot) -- and I am not really sure why. So, when I slapped together this wooden fender I tried to recreate that feel. Actually, I prefer the mount I did on my Onewheel Plus of just cantilevering the EGO battery out over the sensor foot -- because then strapping it down (which is important!) puts another strap holding the entire fender/platform to the rails. Soon I will change this fender/platform further exploring the cantilever placement.
-
@loaffette -- The arcs of bicycle tire on the back with the extra long wooden struts are my freewheel brakes. More than once I have experienced overcharge electrical cut-out, and going downhill the slippery bumper would do nothing to slow me down. The first day I put my first set on my Onewheel V1 tested it: Not going downhill I overwhelmed the EGO battery (sole power) to nosedive cut-out, except I saved the dive only to try to brake with regen -- which of course did not work -- and rubber engaged with pavement, leaving skid marks, and wonderfully slowing me down, weaving and dancing, until when I fell it was then gently and easily. The freewheel brakes worked! (Keep in mind the Greenway environment in which I mostly ride is flat and paved with only a couple of sloped hills -- no tricks or steep gnarly trails.)
-
@onedangt -- One of my favorite experiences about Onewheeling soon after a rain is looking down at the puddle reflections of clouds and blue sky.
-
@s-leon I was talking about the wooden crate but that actually is a pretty smart mod
113 volts?! I could lick that!
-
@loaffette -- Oh! Hmmm... I have played with several versions of the wood crate fender/platform. Sturdy and solid are the best features in the current 2"x 4" based realization. The weight, to me, is not really much of an issue. Earlier boxes had warping, dimensionality, and "walking" issues due to being knocked about and being ridden in soggy wet environments. Too, I added clips and wooden stops to keep wires and things in place. Lately the clips have been randomly losing their wire handles -- time for a new clip idea.
-
@s-leon while it might not win any beauty contests, it is still very cool to see you making it your own! Can you carry a spare one around and swap it out?
-
Trail hazard in the environs of local farm fields. Just a few seconds after throwing this ear of dry field corn off the Greenway I was surprised to actually watch a squirrel let loose of another ear of dry field corn at the edge of the pavement a little further down the trail. With my V1 a few years ago I ran over an ear of squirrel-dropped field corn on the Greenway and nearly tumbled. So, I watch for these hazardous ears of corn and toss them off the trail when I see them.
-
Snow country for old men...
-
@s-leon "Several feet of snow"... oh wow be safe!
-
@lia -- Ha! The "several feet of snow" turned out to only be about two inches deep.
-
@s-leon Still a lot for me, barely seen maybe 2 in my life.
Have you considered a snow plough mod as a new project for the Onewheel? :) -
@lia Ha I thought about cutting up an old shovel earlier this week when It started snowing here. The downside would be you have to kinda be nose dragging to get it to clear the path. Unless you had some kind of spring loaded mount pushing the blade into the ground hmmmmm
-
@cheppy44 said in Environments:
some kind of spring loaded mount pushing the blade into the ground
You've just invented a new kind of nosedive!
GT-S > GT > Pint X > XR > +
-
@onedangt A nose-plummet
