XR badgersense (Where to buy!?)
-
@s-leon Understood.
Won't let anyone else use it or really touch it, and the system won't leave the Onewheel until I send it back.Also, happy early birthday!
-
Yesterday I got an email that LOAFFETTE received the BadgerSense, installed it, and was taking it out for a test ride. Included in the email was a photo of the LED strip mounted on the XR rail, all lit up blue signifying a full battery.
-
@s-leon It's on, and it works!
I've noticed that I've started riding a lot more confidently with the Badgersense on. I'm testing out different things and watching the output of the device when riding around at night. I notice that the motor actually approaches nose-dive when you push hard on the footpad when starting from standing still, as half of the green LEDs turn red, then slowly return to green, then to blue.
I find that I actually don't push too hard on the board, though I want to see where I get pushback relative to how close I am to nose-dive according to the badgersense.
Most of this testing is done at night so there are less people outside.
Installation was..
Terrifying.
I actually thought I was going to have to look into adding extra wire length or having to ride without the wire guard but I got it figured out! Did find out that one of my screw holes at the front side of the board closest to the motor is possibly stripped. I will look into re-tapping the screw hole for now, as Varial rails are +$500, which is super expensive.Like
I'm probably going to have to work a summer job to get those, or at least win the lottery or sell a kidney.
(There is a sale on the lifted tail rails on Float Life but I'm really looking for front and back clearance, not only back clearance.)I'll report back later with my findings when riding around for a bit. I'll have time off this weekend to test out the onewheel and badgersense.
Also, I noticed when I was installing the Badgersense system but all of the electronic parts were warped. The strip is pretty curved up and the box that goes near the motor had a weird warped edge. I think I may look into also 3D printing a case or guard for those if that poses a problem. I think it may have gotten rapidly heated then cooled during shipping.
Again, thank you to S.Leon for the set! I'll send him a generous amount of clips for the LED strip when I send it back!
113 volts?! I could lick that!
-
@loaffette -- I agree, the BadgerSense inspires Onewheeling confidence because it shows you visibly when you are drawing hard on the battery.
Note, though, that it sometimes gives false readings: Slowing to traverse root ridged pavement I have seen it go full RED on more than one occasion -- when I've Onewheeled across those bumps hundreds of times before and since with no problems, ever. -
@loaffette -- As for the warped LED strip and the slightly malformed power box -- those were like that when I had them; it does not affect performance.
Again half RED is safe, it's full RED to avoid.
And the blue/yellow/red which shows at slow speeds is battery percentage. The single white, hard-to-read LED is speed. -
@loaffette -- A BadgerSense with BadgerSight was just listed for $250, on Facebook, in the NO B.S. ONEWHEEL PARTS & Board sales group. Today, Monday, February 20th 2023.
EDIT: I did not want this BadgerSense to get away, so I bought it. Now, @LOAFFETTE , sometime within the next year if you want you can purchase from me the one in your possession... Or, the guy tells me that he has another one also for sale -- I can put you in touch with him if you like.
EDIT, again: Well known Nico Aleman also posted in the comments under the listing that he has two BadgerSense (and likely BadgerSights) for sale.
-
@s-leon Going to probably see if I can
temporarily stealborrow a friends hairdryer and find something flat and heavy to try and level the LED strip back out. I have a working design now, but I can only use one with the current curvature of the strip -
@s-leon I may purchase the one you gave me later on,
and give me his contact info, I wanna see if he's got a BaderSight he'll sell me as well.113 volts?! I could lick that!
-
@loaffette -- Try Nico Aleman for a BadgerSight, or the whole package of BadgerSense with BadgerSight. The other guy wrote me that the BadgerSense he has left is without a BadgerSight. Or, maybe ask me about the one I have coming.
-
@s-leon I'm attempting to join the FB group and I hope to find the Nico guy in there, since searching the name in FB just brings up about.. 200 Nico Aleman's
How much are you willing to sell the badgersight and the badger sense for?
113 volts?! I could lick that!
-
@loaffette -- The BadgerSense and BadgerSight would go to you for what I paid for them this week, plus shipping. So, that's the BadgerSense already in your possession, and the BadgerSight which is still in transit on its way to me. And if you want to trade LED strips in the deal, I am open to the idea.
And while you are welcome to borrow, free of charge, the BadgerSense until next February and then return it -- or purchase and pay for it -- any time between now and then, I will not be sending the BadgerSight until a deal is made and payment is received. Fair enough?
Oh yes. And you are welcome to get either or both from someone other than me. Nico Aleman is a terrific Onewheel rider, and a respected educational voice on Facebook. The reason he has one or more BadgerSense and/or BadgerSights to sell is that he rides VESC now. -- In its app VESC has its own measure of battery draw.
-
@s-leon sounds fair! I'll look into the finances for it, though for now it won't be fiesable
-
@S-Leon said :
... on Facebook, in the NO B.S. ONEWHEEL PARTS & Board sales group. Today, Monday, February 20th 2023.
Ever since you mentioned it here my request been pending [again(?)]. Out of ~dozens useful OW related groups, the one that I think I've tried to apply ever before. I don't read from their short rules what I'm wrong about.
-
Received the new LED strip and the badgersigth from Leon today! Figured out pairing two wireless adapter thing to board, and now I'm cooking with gas!
The post office closed eaerlier than expected so I'll have to ship the old LED strip, rail clips and MAYBE a little trinket for Leon :)
Mounted the badgersight on my helmet, near the bottom
-
Left for vacation on monday, came back Friday to a badgersense that wouldn't charge or turn on..
Well, fun.
I'm assuming that the battery either just needs a full charge, or needs replacing. I have spare batteries on hand that I can replace the old one with. I was told by someone in DFW who uses a Badgersight that the batteries are apparently pretty cheap and he's had to replace his twice on his own.Will plug it in and leave it charging for a while, will report back.
113 volts?! I could lick that!
-
look who decided to wake up
little sh-113 volts?! I could lick that!
-
@loaffette Nice one getting it back up and running. Sleepy batteries are the worst lol.
-
I'm back to document some things I have discovered in the past week or so
1: Badgersight does not like laptop chargers that use type-c. The badgersense refuses to charged off of a laptop charger, however it charged off of a 10W charger.
2: The batteries in the Badgersense are quite cheap and are really bad. Someone in the DFW ride group has a badgersense they've had to tear open because the battery went bad. This means that after some time, you will need to tear open the badgersense and replace the lithium battery inside.
3: Sometimes, I've found that leaving the badgersense off for extended periods of time causes it to refuse to turn on. This may be due to the cheap battery or very bad luck. However, I am not superstitious so I will chalk it up to the bad battery. Usually leaving it plugged in for a while and trying to turn it on works, though for how long I do not know.
Also, since I'm going to be doing a lot of mods for my XR, I am considering making a large thread of some kind that goes into all of the mods I've done, and how I did them.
I plan on adding a VESC, modifying and making my own fender, and making the LED system I'm working on much more rigged and workable. I will also document some things about the XR that I personally find interesting or I feel that aren't documented well.
113 volts?! I could lick that!
-
@loaffette -- Thanks! I received the BadgerSense and BadgerSight back in the mail today.
