@lia
Lovely. Thanks. 👍
I have found some other ones too. Once I tackle it I'll confirm what works best.
Fingers crossed 😉

float logo.JPG

Final touch

Welcome to fam!
@Dnollie said :

... material people use on surfboards/paddle boards for the Onewheel grip? That rubber diamond shaped traction pad type thing?

Sounds familiar to EvoGRIP™ Diamond Stud ?
StickyFeet -- they've been trending throughout various media platforms lately. Somewhat 'next level' new solution after numerous dif griptapes, foam-pads etc.
(No personal experience, tho.)

@lia
Insert Texas not getting cold until early-December
Insert crazy texas weather

I hope to attend a really big onewheel event this year, and meet some people in the VESC community.
I'm also hoping to waterproof my board and to develop a couple cool things I've been cooking up, one of them involving a helmet addon

also, I will try not to crash again

@hanahsdax
Nice one, thanks.
As you know, it takes some dedication to get them done.
I'm sure you've enjoyed doing it as much as I have 😉👍😉👍

A Christmas present celebrating wild beavers living on the farm here, and Onewheeling! -- by an eight year old artist)
IMG_6219.JPEG

IMG_0913.jpeg
Thought I would join the party for a minute and make it 5 for 5.

@chippmover
Congratulations on joining the Onewheel community. You have made a fine choice.
Just ease into it, no heroics, the skill set will improve with time on the board.
I started riding at 68 years of age, and am currently 70. I ride every day, and enjoy every mile.
Be safe my friend!
Doug

That’s good to know @lia thank you. I’ll do a little more research around the ff deletes. See you on ride soon soon 🙏🤙

@jordan5100 -- Hi. Simple things first: My guess is you've already ruled out fender rubs or nubs under the fender; made sure the bolts holding the wheel to the rails are torqued evenly each/both sides; and checked for tyre irregularities.

Personally, not being sure of myself opening up the motor, if it was mine I'd probably trade out the whole motor for another. If you are adventuresome -- you could part the stator and hub, and you could probably find a stator (or hub) to remedy the problem. Or, once open, the source of the noise might then be clear, and a solution will work its way into your head (and hands).

Again, though, I'm more of a Onewheel rider than a technician of Onewheel insides, and to me, to minimize board down time I'd swap out motors for one kept in my reserve jumble of parts for just this kind of situation.

Others in the OWForum here are more detail oriented!

WOW new beast!Like a lot!GT sux,too heayv

@lia said in New XR!!!!:

TLDW; XRC modules will fit in GT rails but you won't fit a GT battery box in the XRC rails. Controller module will fit regardless.

Diffrence:battry& rails
You made battery box for GT,rigth?Made 4 XR Classc! Would take 20 min 4you!

,has same lid,proly same led window,just shallower.

@cjbguam Not dumb at all :)

Assuming U17 on the controller side is broken then an Owie chip won't change anything sadly.

If you need someone to take a look at this Justin over at https://www.fixmypev.com/ has dealt with some of these in the past and offers repair so in the worst case he should be able to perform a repair.

@lia I need to take a look at the GT custom shapings to be fair as the single zone allows you to still heal lift I did not know until I watched the shaping vid

@lemur hands down one of the cleanest installs ive seen.

@lia I totally understand! No worries about the address. I wouldn’t mind meeting up at a restaurant or coffee shop near your place, or I could even leave the board with you if that works better. Maybe we could chat somewhere privately, like Messenger or something, to sort out the details. And of course, I understand there’ll be a cost for the repair.

Let me know if that sounds good to you!