@lemur sorry lemur, i dont know where my reply went but i m unable to dm you also due to a restriction. You can email me at leebrennnen@gmail.com if you have any questions
Best posts made by bradster3
-
RE: Where to find 4212 xr hex files for the bmsposted in Repair
-
RE: Where to find 4212 xr hex files for the bmsposted in Repair
@lemur you rock friend, this made my night. Iwill try and send it over next day off and any hiccups ill report back.
Latest posts made by bradster3
-
RE: DIY repairs and electronic parts – where do you usually source them?posted in Mods & DIY
Mouser will be your best friend. This forum will be your best friend. It has parts, the bootup sequence and flow, and breaks down microchip and battery chip and where to source them.
When you get into the weeds, make sure you have a inline fuse because i have fried to esc due to shorts. I had one where it was a xt60 with a fuse between it just incase. The bms really does not have a known failure on paticular parts ( im on a og pint, they are tanks) and i just opted to buy a broken bms from a local seller as a donor for parts. On pint or xrbms its really easy to knock a cermaic cpacitor (the little things around the big bms chip in the middle). Ive onlt worked on pints a xr so cant say anything on the gt and up. Rest is really trial and error.
-
RE: Where to find 4212 xr hex files for the bmsposted in Repair
@lemur appriciate the looking out. I hit a wall this week with the microchips. They are from 2.0.7 revision so im guessing the chips are locked out from erasing. They pass and write properly according to mplab. Tired 3 i had around and all three lied about success. Im gonna have to replace the 1788 with a new blank one. Orderd them yesterday and will update when everything comes in. My board is on 4212 and already have a owie inline so the only issue is the fw.
-
RE: Where to find 4212 xr hex files for the bmsposted in Repair
@lemur you rock friend, this made my night. Iwill try and send it over next day off and any hiccups ill report back.
-
RE: Where to find 4212 xr hex files for the bmsposted in Repair
@bradster3 said in Where to find 4212 xr hex files for the bms:
@lia thanks friend
Still says its restricted until lemur adds me as a friend.
-
RE: Where to find 4212 xr hex files for the bmsposted in Repair
@lemur sorry lemur, i dont know where my reply went but i m unable to dm you also due to a restriction. You can email me at leebrennnen@gmail.com if you have any questions
-
RE: DIY repairs and electronic parts – where do you usually source them?posted in Mods & DIY
Hey
Sorry about that, it might be because i am new. I tried to message you i also got a restricted error. If you want to you can email it to leebrennnen@gmail.com -
RE: Where to find 4212 xr hex files for the bmsposted in Repair
@bradster3 also, its my old bms is on a 2.0.8 revision, new one is a 2.0.7 revision so that might be a issue.
-
RE: OneWheel Pint BMS Module wanted!posted in Repair
@mirhannes check ebay. Ive seen a few here in the us for 180 bucks witch isnt that harsh. They pop up frequently and i just bought one for 120 from a seller.
-
Where to find 4212 xr hex files for the bmsposted in Repair
Long story short i fried my old bms in my xr due too rain. Was able to pull the hex from it when it was on 4209 but dropped the ball and accidently updated the board while diag. Got a new bms from a pint on a low revision and sent the hex file i managed to pull off the old bms and send it too the new bms no issues. However, when i hooked it up i get nothing. Plugging in the charger waskes up the controller not the bms. The bms is tested good from the seller. Im guessing my hex got currupt somewhere down the line and i need to test a good working hex to make sure its a whole other issue. Keep in mind the old bms would force the board on and would not turn off till i unplugged it. Any help would be appriciated.