XR footpads into GT rails
-
@lemur thanks for the photos man
Would love to see that with the bumper around, and how the footpad fits around, if looks bad...
To overcome the 2.5mm would be pretty easy with a 2.5 gastket.. this is not a problem I guess. -
Just going to say "you don't really need a gasket"... If you're willing to RTV it shut... Just goop it on the top edge, and plop the lid on. You can always go around the outside edge of the box too, and if you don't do the slide in/out method of disassembly and go for a straight pull off the rail it'll be fine. I run a small bead of silicone along the inside of my rails like this for an extra bit of sealing.
-
@ed_co Doable with a wooden footpad or a stiff printed XR style footpad, but a Kush would need a stiffener underneath.
-
@lemur I am fine with a thin stiff plank underneath
I just hope the proper XR battery box could be a reality one day. Wouldn't care anymore about GT platform.
-
@lia said in XR footpads into GT rails:
@ed_co Has anyone managed to come close to fitting 20s2p into an XR battery pack, especially 21700?
That pack would probably have to be longer than the stock pack or taller like it is in the GT.@Lia, I think I have an idea. Can we talk about it?
