Posts made by GrzeWho

@lia I was in contact with them by @ but since a few days it seems as if the contact has broken off, I will remind myself today ;) on their discord I also posted this topic, for now not too many hints https://discord.com/channels/731226901867266149/1064595548641964072. I handled it as gently as possible. The LEDs came to me not in a nice box like on the website, but rolled together in a protective film, the package was also missing a bag with thermo paste and a cloth. I don't know was it shipped like this, or was it repacked somewhere along the way. I do not have much possibility to resolder it.

@lia Yes, I am definitely connected to Thor, I check every time :) maybe a little chaotically I wrote above, the status LED bar responds in real time and I can turn it off and on with a button from the app "LIGHTS OFF", but the front and rear do not respond at all when i press "HEADLIGHTS OFF" i the app. So I guess it's something else. I checked the routing of the wires from the connector to the LEDs and it looks the same as in the instructional video (how to install a GTFO kit). However, I don't like the soldering of one of the wires, the red one, and I'm wondering if that's what caused it. When i turn on the controller, front LEDs seems to turn on for a 1ms, just a blink, the rear one doesn't.

@grzewho said in GTFO kit thor300 fron and back LED problem:

@lia Thanks a lot for your answer, you may be right, because they are disabled in my appUI. But how to save the ON setting ? there is no write button at the bottom and when I swipe to refloatCFG it doesn't hold the settings, and when i go back to appUI they are OFF, same when I restart Thor and eventually they don't turn on and in appUi they are OFF. Maybe I should put it together, go through the engine configurations etc. and only when the board is complete will it work ?

ok, so now I see that as I click Lights On/Off and the LED status bar turns on and off, in real time. When I click Headlights On/Off nothing happens :(

@lia Thanks a lot for your answer, you may be right, because they are disabled in my appUI. But how to save the ON setting ? there is no write button at the bottom and when I swipe to refloatCFG it doesn't hold the settings, and when i go back to appUI they are OFF, same when I restart Thor and eventually they don't turn on and in appUi they are OFF. Maybe I should put it together, go through the engine configurations etc. and only when the board is complete will it work ?

Hello to all esteemed forumers,

I bought a GTFO kit to convert an OW GT to a VESC, complete with LEDs. https://www.fungineers.us/collections/gtfo
I connected everything as it should be, turned on thor300 but none of the LEDs started. I reconfigured them in VESC Tool, after a reboot the battery status LEDs fired up but the front and rear ones did not. I think I have set everything right in refloat cgf, I attach screen shots and please let me know if I made a mistake somewhere ? it could be that they are defective, i would like to know this before i start further assembling the board.