Happend to me too. Ask for a picture of the Diagnosis in the Onewheel app. The name probably says ow999999. Mine worked still fine after that bug except a few things. Stuff like day streak or total miles wouldn’t update after that.

@onewheelme Could you share a few pics of the charge port and the charger connector?

Also when it turns on are you able to connect with the app and see any errors?

@lemur I hope people understand how impressive this actually is. Nice work!

@lemur -- Oh my! Shock treatment!

@ahshwheel Hiya,

Are you able to upload a pic of the connector?

It's this button on the tool ribbon all the way on the right :)
aef7efa8-0f09-4ca5-9baf-ef277ab0c1ac-image.png

@biell I will honestly say I'm probably the worst for it 😖

If anyone notices some pages that are slow gimme the linky and I'll manually trigger the resizing regardless of post owner.

@onedangts I kinda guessed the shipping would be a pain to the UK, a PintX would have been nice to have but your one was not destined to be over here.
All the best to it's new owner and of course to yourself 👍
Float on.... 😏

@jack-yang I have a couple of Maxkgo bms's in my builds, the Zbms was always out of stock. the Maxkgo work fine and balances the cells nicely, the only downside is the balance wires and the jst ph connector as they are made of low temperature materials, very easy to melt with a soldering iron, doesn't take much to crush the balance wires. I recommend they be replaced with quality wires .
I had a couple of evaluation "Pickles" 15s and 18s drop in bms, but they never charged the cells above 90% and two 18s-20s bms, but those two instantly "smoked" upon power connection. I'm pretty sure I fallowed the hookup sequence.

So, remember this GT ghosting problem? Because of it, CNR wouldn't ship me my GT grip tape that I ordered. They wanted to wait until FM had figured out the problem before shipping the grip tape. Well, it took them so long to decide that ghosting was fixed that I honestly forgot I had ordered it. in fact, since then, I have been through 3 different GT footpad configurations!

But, apparently we can all now agree that ghosting is fixed, because I got this today from CNR. Note the April 22nd delivered date on my XR grip isn't in the future, it is two years ago!
finally?.png
I assume that at some point in time I will find some use for this.

FM uploaded a short featuring all iterations of the boards with all the pre-production models all the way up to the GT.
Lots of versions leading up to the consumer ready V1.

I wonder if there were pre-production versions of the other models.

@lemur haha please turn that into an euc.

@lia i'll pass it on to the person. thanks!

[EDIT]: update -- they said:

"Thank you for that advice! So I got home and I opened it all up and everything looked great, unfortunately lol. I was hoping I would see something that was obvious but it looked pristine once I got the cover off. The good news is I got it to work… The bad news is… I don't know how. I started pushing down on things just to see if anything was loose and then all of a sudden the light comes on. A couple minutes later I was doing something and the light went off and then I pushed down again and the light came back on. so I went ahead and connected everything back together and the light stayed on and I was able to ride it but now I'm worried it's going to shut off. 😬😬😬 I can't trust it to ride it rn because I can only assume I would nosedive."

Who said one wheeled devices must have self-balancing feature?
This boy is so going viral right now.

@notsure I would like to, but 100 v vescs are limited right now, I think the Tronics x12 is about the only choice @ $450 us, too pricey at the moment.