Halloween 2022

blkdout

In case anyone still isn't in the Halloween spirit:

Lia

😈 The song has been chosen~! 😈
And oh is it a good track. Need to stop listening to it so I don't burn it out before I even get to start getting footage >.>

Might have stayed up 2 nights in a row going through a bunch of songs in my library. Settled on 1 that has some spooky vibes and has some real catchy pumpyness to it but not aggressive either. Also it's a remake of an 80's track (tastefully done don't worry) so I'm sure it'll keep everyone happy.

Will be keeping it secret till I finish the vid but in the meantime below are a few runners up that were on the "maybe" playlist. However they didn't make the cut because they were too harsh, too tame, not spoopy or otherwise not fitting the vibe I was going for.

There were numerous others but these were the top contenders.

Anyway enough with the teasing. Have some build pics :3
OneWheel Broom Frame 3.png

Need to make that cauldron fit around the flightfins since I don't want to have to remove them for this. Just want to drop the frame onto the board and be done. Cauldron will likely be made from chicken wire and paper mache like the "wooden" broom body will be after I finish the internal skeleton so it's not a floppy mess.

Thankfully all the wood is leftover from the stock pile so I've not had to buy a lot to get this far.

OneDanGTS

@lia said in Halloween 2022:

Need to make that cauldron fit around the flightfins since I don't want to have to remove them for this.

Of course, how else will you make the broom fly???

NotSure

@lia said in Halloween 2022:

Need to make that cauldron fit

get a cheap novelty cauldron n heat gun that sucker into submission!
https://www.partycity.com/large-black-cauldron-35434.html

sry its just the size

Lia

@onedangt That's using your noggin! However for witch purposes I'll of course pretend it's some magic ;)

@NotSure That's not a bad idea. If the print I'm doing to template the shape doesn't work I might opt for something like that :D

OneDanGTS

@lia said in Halloween 2022:

However for witch purposes I'll of course pretend it's some magic ;)

A shot of you flying through the air off a jump with the moon in the background would make a great cover photo for the video! Better do that last just in case, hahaaaaa!

blkdout

@lia Wasting no time! Looking good!

@notsure said in Halloween 2022:

get a cheap novelty cauldron n heat gun that sucker into submission!

Maybe cut slits for expansion or slots to fit around the fins. Good idea.

Personally I would just unscrew the fins lol. Possibly screw the cauldron in their place but I understand the goal of slipping it on and off. Like a nice outfit lol.

Lia

@blkdout said in Halloween 2022:

Maybe cut slits for expansion or slots to fit around the fins. Good idea.

Very good idea, finished the prints the other day and did similar but I modelled a rough shape of the cauldron instead.

~~Looks alright but I need to now add some padding to the frame before paper-mache'ing the final skin. Still waiting on wallpaper paste to do that >.>~~ Here's a few more build pics~

Need to make the broom bit bulge out at the side more and taper at the tip for a cool look but for now I just have a large volume padded out to save on materials.

Edit: wallpaper paste came :D

Also I love big staplers now!

Only did the one side so I could let that dry before doing the other. Somehow didn't get glue on the carpet.

Small sketch to try decide where to take it next

NotSure

@lia said in Halloween 2022:

Also I love big staplers now!

blkdout

My brother and I had a conversation a few weeks ago about not celebrating Christmas anymore and just doing Halloween. Of course I agreed and he sent me a Halloween gift! Made of glass, super cool. Have it hanging above my computer at the moment. It's already freaked me out a couple times today lol.

Sirgu

Not an onewheel related but surely floating related.
https://uproxx.com/tv/stranger-things-halloween-display-max/
Maybe someone here even from close by Plainfield, Illinois?

Lia

Been a while since I updated my progress. Work had me reschedule my week holiday at the end of the month to the one prior so... kinda now have to really get a move on else no video :(

Crunch time...

Pretty much where I left off

Paint makes a world of difference. Also needed to shape the broom bit a little more so found some spade medium density foam and stuffing I used to build the seat in the main room.

Bit or carpet adhesive and wool laid out to resemble actual bristles for the broom. Actually came out really well.

Then a layer of black paint then spray a little of silver to bring back the lighter tones and give it a dusty look.

For the bottom I didn't want a nasty tail drag to ruin the broom so I laid some faux leather on the underside, then layered some twine there instead of wool since I feel it'll handle friction better than polyester wool.

Same paint treatment to that too ties it all together

Wanted to make the broom frame and cauldron tie together better so made some branches stick up and around the cauldron. Simple to do. Use a dowel to make the initial branch, then use some stuffing to give some pliable volume with tinfoil to give it structure and have it hold shape. Keep going and branching out till you have a branch. Then you just paper mache over using the foil to give some varied texture so it's not just a cylinder.

Waiting on the last one to dry before I can finish using the spray paint on the main frame. Then I can go over with a brush and other tones to bring out some texture. Also need to decide on what other decorations I want to add. The cauldron will have a false bottom so I can put some sheer red fabric in to look like a potion while allowing me to put stuff in there like my phone and the wand. Gotta finish that web too since I got a little tired when making it. Alu u channel is there just to weigh it down in place of what I do end up using.

Speaking of wand...

Realised after printing that middle cage is way too weak so I had to redo it. However it got me into making the rest.

Paper mache'd the sticks then sanded it down after to make it smoother and actually has a wood feel.

New cage design and started adding the gems. Leather wrapped the handle and held the base gem down with some wire which I think looks cool :)

Added the gem to the tip in a similar manner. Painted the wand with a base coat to later ad more detail and shading.

Managed to mount the centre gem with some copper wire, also wire wrapped the edges of the leather to protect the edge and give it some detail that looks... sooooooo good!

Almost ready to hex a mofo >:D

S. Leon

@lia -- Your passion for creativity is thrilling!

OneDanGTS

@lia said in Halloween 2022:

Alu u channel is there just to weigh it down in place of what I do end up using.

A spider, duh!

Lia

@s-leon Thank you :) Honestly there was a plan but I'm just winging it at this point else it'll never get done lol.

@OneDanGT I was considering a pentagram or some rune but a spider makes more sense... I'm a bit dense today, might be the paint fumes getting through the respirator ;)

That did remind me I did have this like giant spider toy from when I was little and kinda just never threw it out. Scares me even touching it now but what better use for it that this.

Trigger warning:
It's a big realistic looking spider so you've been warned :3

Big scary spider D:

I don't know why I kept this freaky looking thing... but glad I did!!!
Now I need to attach it so it doesn't just fall off and terrify some poor child that finds it.

OneDanGTS

@lia said in Halloween 2022:

It's a big realistic looking spider

You'll definitely ride faster with that thing chasing you!

Franko

wow, this whole thing is so great. thank you for posting the step-by-step process. love the big spider!

blkdout

Looks great. Love the wand too. I vote for a matching crystal spider on the front.

Lia

@onedangt I've hopefully secured it well to the bristles so fingers crossed it doesn't fall off and terrify some poor kid lol

@Franko Welcome :) I like showing the steps to make stuff like this. Makes it more attainable for anyone wanting to do this. The trick is to learn all the really lazy cheats to make things look good ;)

@blkdout Thanks~ x A crystal spider sounds cool. I'll see if I can kitbash one with some 3D models to prints or something.

Nearly done I think, got a few more bits to add but it's mostly presentable~

Added a darker coat of brown with a brush then smeared and dabbed it away with a cloth to give it some texture so it looks like bark now :) Got a few spots still to do though.

Also added some red sheer fabric to the cauldron to replicate a potion look. Got a purple one coming to see if that looks better.

Bunch of jewellery I wasn't ever going to wear helped decorate some bits along with some printed belt buckles sprayed silver, looks real nice :)

Casual pentagram chilling up front wire wrapped to the frame to tension it in place. Seen the technique on some Wiccan stuff and it looks pretty cool so replicated the style.

Franko

@lia so fantastic! my only remaining question is: what are YOU going to wear to ride it??