<![CDATA[The floatwheel.]]>I bought a secondhand adv pro on Friday and have been having a bit of fun with it this weekend.
Compared to my XR the low down acceleration is staggering, it just goes. I've nosedived the XR a couple of times trying to accelerate too hard, and after this I don't think I can go back to it. I'm not a small guy and always thought I was probably pushing the limits of it.
25mph is easily achievable on flat paving and hills aren't a thing I even slow down much for now. It climbs 6"/150mm near-vertical changes of surface with the slightest de-weight from me. I rode 9 miles to 40% of charge and I was not taking it slowly.
The only downside is the weight. You don't feel it at all riding it and the board is still quite carvey, but if you have to lift it over a fence or something you will be glad it has two handles.
I even love the weird transformer noises it makes at low speed.

IMG_20231210_105035_HDR~2.jpg

]]>http://owforum.co.uk/topic/386/the-floatwheelRSS for NodeWed, 15 Jul 2026 08:00:08 GMTSun, 10 Dec 2023 19:01:21 GMT60<![CDATA[Reply to The floatwheel. on Thu, 07 Mar 2024 18:14:51 GMT]]>I lowered the board one notch because I wanted to try it. It feels so good, so stable. The fender doesn't fit now but I don't think I can go back. 😭

IMG_20240307_172427_HDR~3.jpg

]]>http://owforum.co.uk/post/6030http://owforum.co.uk/post/6030Thu, 07 Mar 2024 18:14:51 GMT<![CDATA[Reply to The floatwheel. on Sat, 02 Mar 2024 16:16:33 GMT]]>I have a new tyre/tire! It's a 6.5" Hoosier treaded, very similar to a T2. The floatwheel is now much carvier and is bound to have more off road grip. It was an absolute nightmare to fit, after several attempts (thanks again Lia for the help) I managed to get one side to bead at 90psi but the other side just wouldn't. I eventually took it to a fitter and it seated after many blasts of 140psi.

IMG_20240302_155705_HDR~2.jpg

]]>http://owforum.co.uk/post/6018http://owforum.co.uk/post/6018Sat, 02 Mar 2024 16:16:33 GMT<![CDATA[Reply to The floatwheel. on Sun, 31 Dec 2023 17:04:18 GMT]]>IMG_20231231_165852_HDR.jpg

Nearly there now. The rails are green/purple flip paint which is very difficult to show in a photo, and the fluoro orange was meant to be red but that's how it came out. 🤷

]]>http://owforum.co.uk/post/5853http://owforum.co.uk/post/5853Sun, 31 Dec 2023 17:04:18 GMT<![CDATA[Reply to The floatwheel. on Fri, 29 Dec 2023 20:53:32 GMT]]>@lia probably, but I rolled most of it off with my thumb then got rid of the rest with white spirit. The rails are pretty much finished now, maybe one more coat of lacquer.

]]>http://owforum.co.uk/post/5848http://owforum.co.uk/post/5848Fri, 29 Dec 2023 20:53:32 GMT<![CDATA[Reply to The floatwheel. on Fri, 29 Dec 2023 20:19:01 GMT]]>@theadman would isopropyl alcohol help remove it?

]]>http://owforum.co.uk/post/5846http://owforum.co.uk/post/5846Fri, 29 Dec 2023 20:19:01 GMT<![CDATA[Reply to The floatwheel. on Fri, 29 Dec 2023 20:02:47 GMT]]>@lia it's the glue residue that's the big PITA, especially after I'd missed a bit and had to sand down and repaint.
The covers are very thin real carbon fibre, very sharp in places.

]]>http://owforum.co.uk/post/5845http://owforum.co.uk/post/5845Fri, 29 Dec 2023 20:02:47 GMT<![CDATA[Reply to The floatwheel. on Fri, 29 Dec 2023 17:44:00 GMT]]>@theadman Looks good ☺️
Guess it’s a decent sign the old ones were hard to remove since it’d look pretty naff if they fell off.

]]>http://owforum.co.uk/post/5843http://owforum.co.uk/post/5843Fri, 29 Dec 2023 17:44:00 GMT<![CDATA[Reply to The floatwheel. on Thu, 28 Dec 2023 23:33:34 GMT]]>Rail guard covers. Still a PITA to remove on the FW. I put this rail in the over at 80 degrees C and most of the glue comes off easily. Most of it.
IMG_20231228_141735_HDR~2.jpg

Super special custom rattle can paint job in progress.
The top rail is unpainted and the bottom is painted awaiting lacquer. No, I didn't miss a bit. ;)

IMG_20231228_162258_HDR~2.jpg

]]>http://owforum.co.uk/post/5842http://owforum.co.uk/post/5842Thu, 28 Dec 2023 23:33:34 GMT<![CDATA[Reply to The floatwheel. on Tue, 12 Dec 2023 23:52:08 GMT]]>@lemur Loaffette shared some pics in this thread. It looks like they're spring loaded.
https://owforum.co.uk/topic/207/other-float-prototype-devices/33
alt text

]]>http://owforum.co.uk/post/5821http://owforum.co.uk/post/5821Tue, 12 Dec 2023 23:52:08 GMT<![CDATA[Reply to The floatwheel. on Tue, 12 Dec 2023 23:47:03 GMT]]>@lemur I don't actually know, I will be taking bits apart at some point to check waterproofing so I'll look.

]]>http://owforum.co.uk/post/5820http://owforum.co.uk/post/5820Tue, 12 Dec 2023 23:47:03 GMT<![CDATA[Reply to The floatwheel. on Tue, 12 Dec 2023 22:53:36 GMT]]>@theadman Are there spring loaded pins on the bboard that contact the 3 trips on the footpad?

]]>http://owforum.co.uk/post/5819http://owforum.co.uk/post/5819Tue, 12 Dec 2023 22:53:36 GMT<![CDATA[Reply to The floatwheel. on Mon, 11 Dec 2023 23:51:56 GMT]]>More stuff. This is the underside of the front pad and that is the connector. There's an O ring to seal the circular piece. This board is obviously VESC based but this design is something new entirely, and quite ingenious.IMG_20231211_234847_HDR.jpg

]]>http://owforum.co.uk/post/5809http://owforum.co.uk/post/5809Mon, 11 Dec 2023 23:51:56 GMT